www.vishay.com for technical questions, contact: nlr@vishay.com document number: 29109 58 revision: 24-apr-09 2381 553 4...6/mlv0805e3...3t vishay bccomponents smd 0805 multilayer varistor features ? surface mount multilayer surge suppressor ? inherent bidirectional clamping ? excellent energy/volume ratio ? suitable for reflow soldering ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec applications over-voltage and transient voltage protection: ? data lines and i/o port protection ? protection against esd transients ? on-board protection of ic?s and transistors ? modem protection ? lcd protection description size 0805 (2012m) multilayer chip varistor with nisn terminations. packaging available in 8 mm paper tape and reel. notes ? sinusoidal voltage assumed as normal operating condition. if a non-sinusoidal voltage is present, the cres t voltage x 0.707 should be used for type selection. ? voltage at a current of 1 ma, measured according to 4.3 of cecc 42 000. ? parts are not recommended for automotive applications. quick reference data parameter value unit maximum continuous voltage dc ac 5.6 to 30.0 4.0 to 25.0 v maximum clamping voltage at 1 a 15.5 to 65 v capacitance range (at 1 mhz) 80 to 860 pf maximum energy (10/1000 s) 0.1 j maximum peak current 30 to 40 a operating temperature range - 55 to 125 c climatic category 55/125/56 weight 0.011 g electrical data and ordering information working voltage breakdown voltage (1 ma) maximum clamping voltage (1 a) peak current (8/20 s) typical capacitance (1 mhz) part number v rms v dc v b v c i p c 12nc sap v v v v a pf 2381 553 mlv0805e3 4.0 5.6 7.1 to 9.3 15.5 40 860 40406 0403t 7.0 9.0 11.0 to 14.0 20.0 40 585 40706 0703t 11.0 14.0 16.5 to 20.3 30.0 40 280 41106 1103t 25.0 30.0 37.0 to 46.0 65.0 30 80 42506 2503t
document number: 29109 for technical questions, contact: nlr@vishay.com www.vishay.com revision: 24-apr-09 59 2381 553 4...6/mlv0805e3...3t smd 0805 multilayer varistor vishay bccomponents dimensions in millimeters recommended footprint in millimeters v/i characteristics t l 1 w l 2 l 3 l 4 l 1 wtl 2 and l 3 2.0 0.2 1.25 0.2 1.0 max. 0.4 0.3 c a b ab c 1.4 1.2 3.4 23 8 1 553 42506 23 8 1 553 41106 23 8 1 553 40706 23 8 1 553 40406 10 -5 10 1 10 -1 10 -2 10 -3 10 -4 10 2 1 10 100 max. leakage current max. clamping voltage current (a) voltage (v)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
